M. H. Shojaee fard

• Director of student’s affairs (IUST) 1979
• Head Division of postgraduate (Ministry of Culture and Higher education (MCHE) Head Division of research office (MCHE)
• Head of Eng. Research Group and Mech. Eng. Committee (MCHE)
• Deputy President of: Iran Research Organization for Science In this group research activity of more than 25 mechanical engineering departments of universities are managing and Tech.
• Mech. Eng. Member of juries for Annual International Kharazmy a research contest with 15 branches in Iran and totally 1500 personal with 50% of them in mechanical Eng Department Research awards.
• Mech. Eng. Member of Industry Committee (NCSR) =National Council of Scientific Research. 1992-1998) Contest of research for mechanical Engineering members of different industries in Iran ( more than 20000)
• Mech. Eng. Member of Energy Committee (NCSR) 1998 to Now)
• Member of more than 25 Mech. Eng. Committees in universities and industries in Iran

• Heat Transfer (BSc)
• Turbo machinery (BSc)
• Boundary layers (M.Sc &PhD)
• Turbulence (M.Sc &PhD)
• Aerodynamics (M.Sc &PhD)
• Chassis Design (BSc)
• Heat Transfer in ICE (M.Sc &PhD)
• Wet Steam in Turbine (M.Sc &PhD)
• Thermodynamics (BSc)
• Vibration (BSc)

“Principles of Boundary Layer and Turbulent Flow” in Persian 2023

“An introduction to Heat Transfer and examples of applications” in Persian 2023

Translation of “Hydraulic and compressible flow Turbo machines”, T.A. Sayers,1994, Mc Grahill, 1996, Published by IUST, 1997

“Classical Thermodynamics” in Persian 2003, FZA

“Guide to Gambit & Fluent Software”, in Persian 2003, IUST

Translation of “Introduction to Computational Fluid Dynamics”, 2003, IUST

Translation of “Introduction to Fluid Mechanics”, 2004, IUST

Translation of “Fundamental of Boundary Layers”, Schetz, 1984, Simon & Schuster

Translation of “Principles to turbo Machinery”, R. K. Turton, 2004, CHAPMAN & HALL, 1995, Under printed by IUST, 2006

• [1] Bakhtar, F., Webb, R.A., Shojaeefard, M.H. and Savage, R.A,”An investigation of nucleating flows of steam in a cascade of turbine blading”, Trans.ASME, J. Fluids Engng, 1993, 115, pp 128-134.
• [2] Shojaeefard, M.H. , Semanian, N., “Design and production of six freedom compiler”, International Journal of Engineering (IUST), 1993, Vol. 4, pp 1-12.
• [3] Shojaeefard, M.H. , Bagheri, H. and Rahai. H.R., “On the Drag and Shedding Frequency of Wire- Wrapped Cylinders” , Journal of Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 1997, pp 1563-1570.
• [4] Shojaeefard, M.H ., Mastaly, “Study pressure drag force of a lump on the surface of ultrasonic rockets ”, International Journal of engineering(IUST), 1998, Vol.10, pp 17-31.
• [5] Shojaeefard, M.H ., Rahai, H.R., “Flow Past Wire-wrapped Cylinder”, International Journal of engineering (IUST), 1999, Vol. 10, pp 63-75.
• [6] Shojaeefard, M.H ., Khalatbary, A.A., “Calculation of impact force of lumps on the surface of ultrasonic rockets” , Daneshvar(Shahed University), 2000, Vol. 25, pp 109-115.
• [7] Shojaeefard, M.H ., Yassi, Y., “ Improvement of the Agnew Micro Hydro Turbine” , International Journal of Engineering (IUST), 2001, Vol. 115, pp 128-134.
• [8] Shojaeefard, M.H ., Noorpoor, A.R. and Moghadam F., “Experimental and numerical study of Aerodynamics in X7 vehicles” , Journal of Automotive Science (IUST), 2001, Vol. 2, pp 37-46.
• [9] Shojaeefard, M.H. , Sina, A., “Experimental and numerical study of Aerodynamics in Pykan vehicle” , Journal of Automotive Science (IUST), 2001, Vol. 5, pp 1-13.
• [10] Shojaeefard, M.H ., Kamali, R., “Numerical study of fluid flow around exhaust valve with Finite Element method” , Journal of Automotive Science (IUST), 2001, Vol. 6, pp 1-12.
• [11] Rahai, H.R., Vu, H.T. and Shojaeefard, M.H., “ Mixing enhancement using a coil insert” , Applied Thermal Engineering, 2001, Vol.21 , pp 303-309.
• [12] Shojaeefard, M.H ., Noorpoor, A.R., “Study of Energy Accumulation system, Power and break transfer in Hybrid vehicles”, Journal of Automotive Science (IUST), 2001, Vol. 1, pp 11-17.
• [13] Shojaeefard, M.H., Noorpoor, A.R., “ Numerical simulation of two-phase flow (air-cement) in miscellaneous branches (Tee-Way) ”, International Journal of Engineering Sciences (IUST), 2001, Vol.14, pp 135-148.
• [14] Shojaeefard, M.H ., Nasiri, A. and Salari, M., “Flow 3-D Simulation in Catalyst Converter” , Journal of Automotive Science (IUST), 2002, Vol. 9, pp 61-68.
• [15] Shojaeefard, M.H ., Noorpoor, A.R. and Bozchaloee, D.A., “Heat Analysis of Exhaust Valves for Peykan 1600”, Journal of Automotive Science (IUST), 2002, Vol. 10, pp 1-6.
• [16] Shojaeefard, M.H ., Ehghaghi, M.B.,"Experimental and Numerical Study of a Centrifugal Pump - in the Performance of Viscous Flow”, International Journal of Engineering Sciences (IUST), 2002, VOL.13, pp 35-52.
• [17] Shojaeefard, M.H. , Noorpoor, A.R., “Numerical Solution of Sinusoidal Pipe Flow to Simulation ICE Exhaust Valve Flow Behavior ”, International Journal of Engineering Sciences (IUST), 2003, Vol.14, pp 57-67.
• [18] Shojaeefard, M.H. , Nasiri, A. and Momeni, A., “Investigation of Swirl effect on the combustion in OM355 engine”, Journal of Automotive Science (IUST), 2003, Vol. 12, pp 38-47.
• [19] Shojaeefard, M.H ., Nasiritoosi, A. and Fatahi, A., “Numerical Modeling Injection Process for Internal Combustion Engine”, Journal of Automotive Science (IUST), 2003, Vol. 11, pp 12-22.
• [20] Hosseini, P., Eslami, M.R. and Shojaeefard, M.H., “ Generalized thermoelastic analysis of layer interface excited by pulsed laser heating” , Engineering Analysis with Boundary Elements, 2003.
• [21] Shojaeefard, M.H ., Noorpoor, A.R. and Bonchaloe, D.A., ''Transient Thermal Analysis of the Exhaust Valve Using Finite Element Method'', International Journal of Engineering Science (IUST), 2004, Vol.15, pp 34-46.
• [22] SHOJAEEFARD M., AKBARI M., KHALKHALI A., ASADI P., "Effect of tool pin profile on distribution of reinforcement particles during friction stir processing of B4C/aluminum composites", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS .
• [23] SHOJAEEFARD M., "Numerical Investigation of flow Control by suction and Inhection on a subsonic", American Journal of Applied Scinces , 2005.
• [24] SHOJAEEFARD M., "Transient Thermal Analysis of Engine Exhaust Valve", Journal of Numerical Heat transfer , 2005.
• [25] SHOJAEEFARD M., "Numerical Simulation of 2-D Turbidity Currents and Wall Jet", American Journal of Applied Sciences , 2006.
• [26] SHOJAEEFARD M., "Studies on the Influence of Various Blade Outlet Angles in a Centrifugal Pump", American Journal of Applied Sciences , 2006.
• [27] SHOJAEEFARD M., "Thernal contact analysis using system Identification", heat transfer Engindering , 2006.
• [28] SHOJAEEFARD M., "thernal contact analysisloing system identi fram nonlonear models", american journal of applied scinces , 2006.
• [29] Shojaeefard M H, Hosseinimanesh Bahrami 3D Modeling of the Effect of the Louvered Fins in Compact Heatexchangers by Computational Fluid Dynamic IUST International Journal of Engineering Science ( submitted), 2007.
• [30] M H Shojaeefard, K Goudarzi, A R Noorpoor and M Fazelpour "A Study of Thermal Contact using Nonlinear System Identification Models” - Department of Mechanical Engineering Department of Automotive Engineering Iran University of Science and Technology", 2007.
• [31] SHOJAEEFARD M., "expermental and numerical investigation of centrifugal pump performance when handling viscous fluids with different outlet blade angles", journal of faculty of eng vol 34 no 2 , 2007.
• [32] Shojaeefard M H, Goudarzi K and Ghasvari Jahromi H, “Numerical Simulation of 2_D Turbidity Currents and Wall Jet,” American Journal of Applied Sciences x (x) xx-xx 2007 ISSN 1546-9239", 2007.
• [33] Shojaeefard M H Hosseinimanesh, “CFD study and Experimental Comparison of the Solid- Liquid Flow Separation in a Dual lnvolutes Axial Flow Cyclonic Separator ( Isep)” Journal of Multiphase Flow2007", 2007.
• [34] M H Shojaefard and K Goudarzi, "The Numerical Estimation of Thermal Contact Resistance in Contacting Surfaces”, Department of Automotive Engineering Department of Mechanical Engineering Iran University of Science and Technology Tehran Iran", 2007.
• [35] Shojaeefard M.H., Goudarzi K., and A.R. Noorpour,"Experimental Study of Heat Transfer between Exhaust Valve and its Seat of ICE", American Journal of Applied Sciences x (x): xx-xx, 2007,ISSN 1546-9239 (in press).
• [36] Shojaeefard M H, Noorpoor A R, Yarjiabadi H and Havivian M, “Particle Size Dffects on Hydro- Cyclone Performance”, IUST International Journal of Engineering Science Vol 17 No 3-4 2006 Page 9-19", 2008.
• [37] SHOJAEEFARD M., "numerical simulation of flow over an air foil with a cross flow fan as a lift as a lift generating member in a new air craft model", AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY , 2008.
• [38] SHOJAEEFARD M., "shape optimization of the airfoil comprising a cross flow fan", AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY , 2008.
• [39] Shojaeefard M H, Goudarzi K and M Sh Mazidi “Inverse Heat Transfer Problem of Thermal Contact Conductance Estimation in Periodically Contacting Surfaces,” Journal of Thermal Science Volume (18) No 2 2009 pp 150-159 (in press) , 2008.
• [40] Shojaeefard M H and Goudarzi K, “The Numerical Estimation of Thermal Contact Resistance in contacting surfaces", American Journal of Applied Sciences 5(11) 1566-1571, 2008
• [41] M.H., Shojaeefard, K., Goudarzi, and A.R. Noorpoor, "Experimental Estimation of Transient Contact Conductance between Exhaust Valve and Seat", American Journal of Applied Sciences, 2008.
• [42] Shojaeefard M. H., Goudarzi K., Noorpoor A.R. and Fazelpour M., "Effect of Contact Pressure and Frequency on Contact Heat Transfer between Exhaust Valve and its Seat ", International Journal of Engineering, Iran, Vol. 21, No. 4, 2008.
• [43] Shojaeefard M. H., Goudarzi K., Noorpoor A.R., "Experimental Estimation of Transient Contact Conductance between Exhaust Valve and its Seat", International Journal of Applied Engineering Research, Research India Publications, Delhi, India.
• [44] K. Goudarzi, M. H. Shojaeefard, “Experimental Study of the Heat Transfer across Periodically Contacting Surfaces”, Journal of Mechanics, Vol. 25, No.3, 2009.
• [45] SHOJAEEFARD M., "namerical investigation of flow in the liner of a model reverse - fiow gas turbin combustor", department of mechanical engineering , 2009.
• [46] SHOJAEEFARD M., "numerical study of airflow around vehicle a-pillar region and windnoise generation prediction", mechanical engineering department , 2009.
• [47] SHOJAEEFARD M., "Experimental study of stall in an airfoil with forced airflow provided by an integrated cross- flow fan", J of Aerospace Engineering , 2010.
• [48] SHOJAEEFARD M., "Application of Inverse Method to The problem of thermal contact", International Journal of Heat and Technology , 2011.
• [49] SHOJAEEFARD M., "comparison of steel aluminum and composite bonnet in terms of pedestrian head impact", SAFETY SCIENCE, PP. 1_10, 2011.
• [50] SHOJAEEFARD M., "Differential Quadrature Solution of A transient Two- Dimensional Heat Conduction Problem", International Journal of Energy and Technology , 2011.
• [51] SHOJAEEFARD M., "Mathematical Modeling of Potential Flow Over a Rotating Cylinder", IJE , 2011.
• [52] SHOJAEEFARD M., "Numerical and analytical solution of compressible flow over double wedge and biconvex airfoils", Engineering computations International Journal, Vol. 28, No. 4, PP. 441_447, 2011.
• [53] SHOJAEEFARD M., "Optimization of sound transmission through laminated composite cylindrical shells using GA", Journal Mechanics of Composite Materials , 2011.
• [54] SHOJAEEFARD M., "The Two- dimensional Modeling of a Salt- Gradient Solar Pond witn Wall", Journal of Thermal Science , 2011.
• [55] SHOJAEEFARD M., TALEBITOOTI R., "A study of Intake system noise transmission with porous Insulator using Statistical Energy Analysis", بین المللی مهندسی خودرو , 2011.
• [56] SHOJAEEFARD M and TALEBITOOTI R., "optimization of sound transmission theough laminated composite culindrical shells by using a genetic algorithhm", MECHANICS OF COMPOSITE MATERIALS, Vol. 47, No. 4, PP. 481_494, 2011.
• [57] KHALKHALI A. and SHOJAEEFARD M., "A parametric study for improving the centrifugal pump impeller for use in viscous fluid pumping", HEAT AND MASS TRANSFER, Vol. 49, PP. 197_206, 2012.
• [58] KHALKHALI A. and SHOJAEEFARD M., "Artificial neural networks based prediction of performance and exhaust emissions in direct injection engine using castor oil biodiesel-diesel blends", Journal of Renewable and Sustainable Energy , 2012.
• [59] SHOJAEEFARD M., "Artificial Neural Network Based Multi-Objective Evolutionary Optimization of a Heavy-Duty Diesel Engine", international journal of automotive engineering , 2012.
• [60] SHOJAEEFARD M., "Cooled EGR in a Turbo Charged SI Engine to Reduce Knocking and Fuel Consumption", ijae , 2012.
• [61] SHOJAEEFARD M., "Experimental and numerical study of an airfoil in combination with a cross flow fan", Institution of Mechanical Engineers, PP. 1173_1187, 2012.
• [62] SHOJAEEFARD M., "modeling and pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm", material and design , 2012.
• [63] SHOJAEEFARD M., "Numerical investigation on efects of induced jet on boundary layer and turbulent models arond airfoils", HEAT AND MASS TRANSFER, Vol. 40, No. 11 , 2012.
• [64] SHOJAEEFARD M., "Numerical study of the effect of some geometric characteristics of a cenrifugal pump impeller that pumps a viscous fluid", computer and fluids , 2012.
• [65] SHOJAEEFARD M., "Computer Simulation of Performance and Transient Behavior of A Salt Gradient Solar Pond", Jokull, Vol. 63, PP. 58_76, 2013.
• [66] SHOJAEEFARD M., "Investigation on natural frequency of an optimized", latin american journal of sloids and structures, Vol. 11, PP. 113_129, 2013.
• [67] SHOJAEEFARD M., "Sensitivity Analysis of the Artificial Neural Network Outputs in Friction Stir Lap Joining of Aluminum to Brass", Advances in Materials Science and Engineering , 2013.
• [68] SHOJAEEFARD M., "The estimation of time-varying thermal contact conductance between two fixed contacting surfaces", Mechanika, Vol. 19, PP. 167_171, 2013.
• [69] SHOJAEEFARD M., "the investigation of the valve spring stiffiness influence on the thermal contact conductance between the exhaust valve and its seat", heat transfer engineering an international journal, No. 6611 , 2013.
• [70] SHOJAEEFARD M and TALEBITOOTI R., "Enhancing Rollover Threshold of an Elliptical Container Based on Binary-coded Genetic Algorithm", international journal of automotive engineering, Vol. 3, No. 1, PP. 318_327, 2013.
• [71] SHOJAEEFARD M., Eteghani M., Tahani M. and AKBARI M., "Cooled EGR for a Turbo Charged SI Engine to Reduce Knocking and Fuel Consumption", international journal of automotive engineering, Vol. 3, No. 3, PP. 474_481, 2013.
• [72] TALEBITOOTI R. and SHOJAEEFARD M., "Optimum Design of 1st Gear Ratio for 4WD Vehicles Based onVehicle Dynamic Behaviour", Advances in Mechanical Engineering , 2013.
• [73] GOODARZI A., SOLTANI A., SHOJAEEFARD M., and KHAJEPOUR A., "An integrated vehicle dynamic control strategy for three-wheeled vehicles", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, No. 558741 , 2014
• [74] SHOJAEEFARD M., AKBARI M., ASADI P., "Multi objective optimization of friction stir welding parameters using FEM and neural network", Academia-Revista Latinoamericana de Administracion, Vol. 15, No. 11, PP. 2351_2356, 2014.
• [75] SHOJAEEFARD M., AKBARI M., KHALKHALI A., ASADI P., and Parivar A H, "Optimization of microstructural and mechanical properties of friction stir welding using the cellular automaton and Taguchi method", MATERIALS and DESIGN, Vol. 64, PP. 660_666, 2014.
• [76] SHOJAEEFARD M., KHALKHALI A., MIANDOABCHI E., "Effects of Process Parameters on Superplastic Forming of a License Plate Pocket Panel", international journal of advanced design and manufacturing technology, Vol. 7, No. 2, PP. 25_33, 2014.
• [77] SHOJAEEFARD M., NAJIBI A., ANBARLOEI M., and Yeganeh M, "Experimental and numerical crashworthiness investigation of combined circular and square sections", Journal of Mechanical Science and Technology, Vol. 28, PP. 999_1006, 2014.
• [78] SHOJAEEFARD M., NAJIBI A., RAHMATI AHMAD, and ABADI M., "Pedestrian safety investigation of the new inner structure of the hood to mitigate the impact injury of the head", THIN-WALLED STRUCTURES, Vol. 77, PP. 77_85, 2014.
• [79] SHOJAEEFARD M., TALEBITOOTI R., AHMADI R., and GHEYBI M., "Sound transmission across orthotropic cylindrical shells using third-order shear deformation theory", Latin American Journal of Solids and Structures, Vol. 11, No. 11, PP. 2039_2072, 2014.
• [80] SHOJAEEFARD M., TALEBITOOTI R., AHMADI R., and Ranjbar B, "A study on acoustic behavior of poroelastic media bonded between laminated composite panels", Latin American Journal of Solids and Structures, Vol. 11, No. 13, PP. 2379_2407, 2014.
• [81] SHOJAEEFARD M., TALEBITOOTI R., Ranjbar B, and AHMADI R., "Power transmission through double-walled laminated composite panels considering porous layer-air gap insulation", APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, Vol. 35, PP. 1447_1466, 2014.
• [82] SOLTANI A., GOODARZI A., SHOJAEEFARD M., and KHAJEPOUR A., "Vehicle dynamics control using an active third-axle system", VEHICLE SYSTEM DYNAMICS, Vol. 52, No. 11, PP. 1541_1562, 2014.
• [83] MIRZAEI A., SHOJAEEFARD M., BABAIE A., YASSI Y., "Experimental study of redesigned draft tube of an Agnew microhydro turbine", ENERGY CONVERSION AND MANAGEMENT, Vol. 105, PP. 488_497, 2015.
• [84] SHOJAEEFARD M., and KESHAVARZ LELEKAMI M., "Mathematical modeling of the complete thermodynamic cycle of a new Atkinson cycle gas engine", APPLIED THERMAL ENGINEERING, Vol. 91, PP. 866_874, 2015.
• [85] SHOJAEEFARD M., KHALKHALI A., AKBARI M., and ASADI P., "Investigation of friction stir welding tool parameters using FEM and neural network", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 229, No. 3, PP. 209_217, 2015.
• [86] HOJAEEFARD M., KHALKHALI A., and FIROUZGAN A., "Experimental and Numerical Flow Investigation of Intake Manifold and Multi Criteria Decision Making on 3-cylinder SI Engine using Technique for Order of Preference by Similarity to Ideal Solution", International Journal of Engineering, Vol. 28, No. 11, PP. 1663_1670, 2015.
• [87] SHOJAEEFARD M., KHALKHALI A., SARMADI M., and HAMZEHI N., "Investigation on the optimal simplified model of BIW structure using FEM", Latin American Journal of Solids and Structures, Vol. 12, No. 10, PP. 1972_1990, 2015.
• [88] SHOJAEEFARD M., MOLAEIMANESH G., AGHAMIRZAEE N.A., QEZEL BEYG LOO S., and ZEINOLABEDINI B., "Numerical evaluation of the defrosting/defogging performance of HVAC system in the main product of the national vehicle platform", international journal of automotive engineering, Vol. 5, No. 4, PP. 2006_2016, 2015.
• [89] SHOJAEEFARD M., SALIMIAN RIZI M., KHALKHALI A., and Tahani M, "A New Method to Calculate Centrifugal Pump Performance Parameters for Industrial Oils", Journal of Applied Fluid Mechanics "JAFM", Vol. 8, No. 4, PP. 673_681, 2015.
• [90] TALEBITOOTI R., AHMADI R., and SHOJAEEFARD M., "Three-dimensional wave propagation on orthotropic cylindrical shells with arbitrary thickness considering state space method", COMPOSITE STRUCTURES, Vol. 132, PP. 239_254, 2015.
• [91] TALEBITOOTI R., SHOJAEEFARD M., and YARMOHAMMADI S., "Shape design optimization of cylindrical tank using b-spline curves", COMPUTERS and FLUIDS, Vol. 109, PP. 100_112, 2015.
• [92] MAHMOODI A., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., "Theoretical development and numerical investigation on energy absorption behavior of tapered multi-cell tubes", THIN-WALLED STRUCTURES, Vol. 102, PP. 98_110, 2016.
• [93] NAJAFI F., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., "Nonlinear low-velocity impact response of functionally graded plate with nonlinear three-parameter elastic foundation in thermal field", COMPOSITES PART B-ENGINEERING, Vol. 107, PP. 123_140, 2016.
• [94] NAJIBI A., SHOJAEEFARD M., and YEGANEH M, "Developing and Multi-Objective Optimization of a Combined Energy Absorber Structure Using Polynomial Neural Networks and Evolutionary Algorithms", Latin American Journal of Solids and Structures, Vol. 13, PP. 2552_2572, 2016.
• [95] SHOJAEEFARD M., EBRAHIMI NEJAD RAFSANJANI S., and MASJEDI M., "Vehicle Directional Stability Control Using Bifurcation Analysis of Yaw Rate Equilibria", international journal of automotive engineering, Vol. 6, No. 1, PP. 2065_2074, 2016.
• [96] SHOJAEEFARD M., and HAKIMOLLAHI M., "A Comparison on Automotive NPD S PerformanceFactors between Academia Developed and Developing Countries (Case Study)", Transylvanian Review, No. 11, PP. 2867_2879, 2016.
• [97] SHOJAEEFARD M., KHALKHALI A., and FIROUZGAN A., "Intake Manifold Flow Assessment ona 3-cylinder Natural Aspirated Downsized Engine Using CFD and GT-SUITE", International Journal of Engineering, Vol. 29, No. 2, PP. 255_263, 2016.
• [98] SHOJAEEFARD M., KHALKHALI A., and FIROUZGAN A., "Multi-objective optimization of a natural aspirated three-cylinder spark ignition engine using modified non-dominated sorting genetic algorithm and multicriteria decision making", Journal of Renewable and Sustainable Energy, Vol. 8, No. 025705, PP. 025705-1_025705-20, 2016.
• [99] SHOJAEEFARD M., KHALKHALI A., and MIANDOABCHI E., "Multi-criteria decision making approach for selecting the best friction distribution in superplastic forming of a vehicle component", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 230, PP. 146_157, 2016.
• [100] SHOJAEEFARD M., KHALKHALI A., and TAVAKKOLI LAHIJANI A., "Parametric Modal Study and Optimization of the Floor Pan of a B-Segment Automotive Using a Hybrid Method of Taguchi and a Newly Developed MCDM Model", Latin American Journal of Solids and Structures, Vol. 13, PP. 3039_3061, 2016.
• [101] SHOJAEEFARD M., MOLAEIMANESH G., NAZEMIAN M., and MOGHADARI M., "A review on microstructure reconstruction of PEM fuel cells porous electrodes for pore scale simulation", INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 41, No. 44, PP. 20276_20293, 2016.
• [102] SHOJAEEFARD M., and ZARE J., "Modeling and combined application of the modified NSGA-II and TOPSIS to optimize a refrigerant-to-air multi-pass louvered fin-and-flat tube condenser", APPLIED THERMAL ENGINEERING, Vol. 103, PP. 212_225, 2016.
• [103] SIAVASHI M., and SHOJAEEFARD M., "Numerical Simulation of Air Flow around the NP Car Using the Realizable k- Turbulence Model to Predict Aerodynamic Forces and Moments", international journal of automotive engineering, Vol. 5, No. 2, PP. 2148_2162, 2016.
• [104] NAJIBI A., and SHOJAEEFARD M., "ElasticMechanical Stress Analysis in a ۲D-FGMThick Finite LengthHollow CylinderwithNewlyDeveloped MaterialModel", ACTA MECHANICA SOLIDA SINICA, Vol. 2, No. 29, PP. 178_191, 2016.
• [105] AKBARI M., SHOJAEEFARD M., ASADI P., and KHALKHALI A., "Hybrid multi-objective optimization of microstructural and mechanical properties of B 4 C/A356 composites fabricated by FSP using TOPSIS and modified numerical OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 27, No. 11, PP. 2317_2333, 2017.
• [106] SHOJAEEFARD M, KHORAMPANAHI A, KHEIRKHAH VM. EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF OSCILLATION PARAMETERS EFFECTS ON STABILITY DERIVATIVES OF A NACA0012 AIRFOIL.
• [107] Shojaeefard MH, Khorampanahi A, Mirzaei M. Numerical investigation of oscillation frequency and amplitude effects on the hydrodynamic coefficients of a body with NACA0012 hydrofoil section. Journal of Mechanical Science and Technology. 2017 May 1;31(5):2251-60.
• [108] Shojaeefard MH, Azarikhah P, Qasemian A. Experimental Investigation of Thermal Balance and Valve Cover Heat Transfer in a Small Internal Combustion Engine. International Journal of Automotive Engineering. 2017 Jun 15;7(2):2423-33.
• [109] Shojaeefard MH, Khorampanahi A, Koopaee MK. TIME-PERIODIC INCOMPRESSIBLE FLOW SIMULATION USING NON-LINEAR FREQUENCY DOMAIN APPROACH/Simulacija vremenski periodicnog nestlacljivog toka pristupom ne-linearnog podrucja frekvencije. Tehnicki Vjesnik-Technical Gazette. 2017 Oct 1;24(5):1307-15.
• [110] Shojaeefard MH, Zare J, Tabatabaei A, Mohammadbeigi H. Evaluating different types of artificial neural network structures for performance prediction of compact heat exchanger. Neural Computing and Applications. 2017 Dec 1;28(12):3953-65.
• [111] AKBARI M., SHOJAEEFARD M., ASADI P., and KHALKHALI A., "Wear and mechanical properties of surface hybrid metal matrix composites on AlSi aluminum alloys fabricated by friction stir processing", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, PP. 1464420717, 2017.
• [112] AKBARI M., SHOJAEEFARD M., ASADI P., and KHALKHALI A., "Wear Performance of A356 Matrix Composites Reinforced with Different Types of Reinforcing Particles", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 26, No. 9, PP. 4297_4310, 2017.
• [113] NAJAFI F., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., "Low-velocity impact response of functionally graded doubly curved panels with Winkler-Pasternak elastic foundation An analytical approach", COMPOSITE STRUCTURES, Vol. 162, PP. 351_364, 2017.
• [114] NAJAFI F., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., "Nonlinear dynamic response of FGM beams with Winkler Pasternak foundation subject to noncentral low velocity impact in thermal field", COMPOSITE STRUCTURES, Vol. 167, PP. 132_143, 2017.
• [115] SHOJAEEFARD M., AKBARI M., ASADI P., and KHALKHALI A., "The effect of reinforcement type on the microstructure mechanical properties and wear resistance of A356 matrix composites produced by FSP", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 91, PP. 1391_1407, 2017.
• [116] SHOJAEEFARD M., EBRAHIMI NEJAD RAFSANJANI S., and KAMARKHANI S., "Optimization of Exhaust System Hangers for Reduction of Vehicle Cabin Vibrations", international journal of automotive engineering, Vol. 7, No. 1, PP. 2313_2324, 2017.
• [117] SHOJAEEFARD M., and HAKIMOLLAHI M., "NPDs Performance Measurement Model of Automotive Industry", Transylvanian Review, Vol. 17, No. 18, PP. 4608_4617, 2017.
• [118] SHOJAEEFARD M., KHALKHALI A., EBRAHIMI NEJAD RAFSANJANI S., and GHADIRINEJAD K., "Numerical investigation on automotive bumper structure improvements for pedestrian protection", INTERNATIONAL JOURNAL OF CRASHWORTHINESS, No. 22, PP. 1_19, 2017.
• [119] SHOJAEEFARD M., KHALKHALI A., FAGHIHIAN H., and DAHMARDEH M., "Optimal platform design using non-dominated sorting genetic algorithm II and technique for order of preference by similarity to ideal solution application to automotive suspension system", ENGINEERING OPTIMIZATION, No. 5, PP. 1_12, 2017.
• [120] SHOJAEEFARD M., KHALKHALI A., and YARMOHAMMADI S., "An efficient sensitivity analysis method for modified geometry of Macpherson suspension based on Pearson correlation coefficient", VEHICLE SYSTEM DYNAMICS, Vol. 55, No. 6, PP. 827_852, 2017.
• [121] SHOJAEEFARD M., MOLAEIMANESH G., YARMOHAMMADI S., and CHANGIZIAN S., "Multi-objective optimization of an automotive louvered fin-flat tube condenser for enhancing HVAC system cooling performance", APPLIED THERMAL ENGINEERING, Vol. 125, PP. 546_558, 2017.
• [122] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., GHADIRI M., and MAHINZARE M., "Micro temperature-dependent FG porous plate Free vibration and thermal buckling analysis using modified couple stress theory with CPT and FSDT", APPLIED MATHEMATICAL MODELLING, Vol. 50, PP. 633_655, 2017.
• [123] SHOJAEEFARD M., ZARE J., and NOURBAKHSH S., "An investigation of the effects of geometry design on refrigerant flow mal-distribution in parallel flow condenser using a hybrid method of finite element approach and CFD simulation", APPLIED THERMAL ENGINEERING, Vol. 112, PP. 431_449, 2017.
• [124] SHOJAEEFARD M., ZARE J., and NOURBAKHSH S., "Developing a hybrid procedure of one dimensional finite element method and CFD simulation for modeling refrigerant flow mal-distribution in parallel flow condenser", INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, Vol. 73, PP. 39_53, 2017.
• [125] YARMOHAMMADI S., SHOJAEEFARD M., and KHALKHALI A., "A family base optimization of a developed nonlinear vehicle suspension model using gray family design algorithm", NONLINEAR DYNAMICS, Vol. 90, PP. 649_669, 2017.
• [126] MOGHADARI M., SHOJAEEFARD M., and MOLAEIMANESH G., "Effects of electrode compression on the water droplet removal from proton exchange membrane fuel cells", KOREAN JOURNAL OF CHEMICAL ENGINEERING , 2018.
• [127] SALAMI Y.Y., SHOJAEEFARD M., and MOLAEIMANESH G., "Thermal behavior of a commercial prismatic Lithium-ion battery cell applied in electric vehicles", international journal of automotive engineering, Vol. 8, No. 2, PP. 2700_2708, 2018.
• [128] SHOJAEEFARD M., MAHINZARE M., SAFARPOUR H., SAEIDI GOOGARCHIN H., and GHADIRI M., "Free vibration of an ultra-fast-rotating-induced cylindrical nano-shell resting on a Winkler foundation under thermo-electro-magneto-elastic condition", APPLIED MATHEMATICAL MODELLING, Vol. 61, PP. 255_279, 2018.
• [129] SHOJAEEFARD M., MALEKI M., MASIH-TEHRANI M., SANGSEFIDI A., and NIROOBAKHSH M., "Designing a buffer-equipped hydraulic engine mount for mid-priced vehicles", international journal of automotive engineering, Vol. 8, No. 2, PP. 2692_2699, 2018.
• [130] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., MAHINZARE M., and ADIBI M., "Vibration and buckling analysis of a rotary functionally graded piezomagnetic nanoshell embedded in viscoelastic media", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 29, PP. 2344_2361, 2018.
• [131] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., MAHINZARE M., and EFTEKHARI S., "Magnetic field effect on free vibration of smart rotary functionally graded nano/microplates A comparative study on modified couple stress theory and nonlocal elasticity theory", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 29, PP. 2492_2507, 2018.
• [132] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., MAHINZARE M., and GHADIRI M., "Free vibration and critical angular velocity of a rotating variable thickness two-directional FG circular microplate", MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 24, PP. 1525_1543, 2018.
• [133] TAVAKKOLI LAHIJANI A., SHOJAEEFARD M., and KHALKHALI A., "Optimal design of the floor panel for an automotive platform under uncertainty of the vehicle lengthof the vehicle lengthof", Geomechanics and Engineering, Vol. 14, No. 1, PP. 91_98, 2018.
• [134] Asadinia N, Khalkhali A, Saranjam MJ. Sensitivity analysis and optimization for occupant safety in automotive frontal crash test. Latin American Journal of Solids and Structures. 2018;15(7).
• [135] Shojaeefard MH, Keshavarz M. Flame propagation model for a rotary Atkinson cycle SI engine. International Journal of Automotive Technology. 2018 Feb 1;19(1):9-25.
• [136] Shojaeefard MH, Khorampanahi A, Mirzaei M. RANS study of Strouhal number effects on the stability derivatives of an autonomous underwater vehicle. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 Mar 1;40(3):124.
• [137] Hashempoor D, ShojaeeFard M. The Analysis of Large Deformation of Beam by Functionally Graded Material (FGM) Under Uniform Transverse Loading. Mapta Journal of Mechanical and Industrial Engineering (MJMIE). 2018 Apr 20;2(01):16-22.
• [138] Gheibi MR, Shojaeefard MH, Saeidi Googarchin H. Direct determination of a new mode-dependent cohesive zone model to simulate metal-to-metal adhesive joints. The Journal of Adhesion. 2018 Apr 21:1-28.
• [139] Yarmohammadisatri S, Shojaeefard MH, Khalkhali A, Goodarzian S. Sensitivity analysis and optimisation of suspension bushing using Taguchi method and grey relational analysis. Vehicle System Dynamics. 2018 Jun 27:1-9.
• [140] Shojaeefard MH, Saeidi Googarchin H, Mahinzare M, Eftekhari SA. Magnetic field effect on free vibration of smart rotary functionally graded nano/microplates: A comparative study on modified couple stress theory and nonlocal elasticity theory. Journal of Intelligent Material Systems and Structures. 2018 Jul;29(11):2492-507.
• [141] Shojaeefard MH, Zare J. An investigation of the potential of improving an R1234yf parallel flow condenser performance using modeling and hybrid procedure of the modified NSGA-II and TOPSIS. Heat Transfer Engineering. 2018 Sep 14;39(15):1405-22.
• [142] Sajedin A, Shojaeefard M, Khalkhali A. Radial Gradient Pressure Effects on Flow Behavior in a Dual Volute Turbocharger Turbine. Applied Sciences. 2018 Oct;8(10):1961.
• [143] SAEIDI GOOGARCHIN H., PASANDIDEH POOR M., MAHMOODI A., and SHOJAEEFARD M., "Energy absorption analysis for tapered multi-cell tubes improved by foams Theoretical development and numerical simulation", COMPOSITE STRUCTURES, Vol. 207, PP. 213_222, 2019.
• [144] Shojaeefard MH, Khakshournia S, Khalkhali A. A new method to find the material constants for Goldberg’s strain-rate dependent constitutive model: an application in automotive polymeric instrument panel. Materials Research Express. 2019 Mar 1;6(6):065302.
• [145] Gheibi MR, Shojaeefard MH, Googarchin HS. Experimental and numerical analysis on the cohesive behavior of an automotive adhesive improved by MWCNT subjected to mode I and II loadings. International Journal of Mechanical Sciences. 2019 Feb 8.
• [146] Shojaeefard MH, Molaeimanesh GR, Ranjbaran YS. Improving the performance of a passive battery thermal management system based on PCM using lateral fins. Heat and Mass Transfer. 2019:1-5.
• [147] Molaeimanesh GR, Shojaeefard MH, Moqaddari MR. Effects of electrode compression on the water droplet removal from proton exchange membrane fuel cells. Korean Journal of Chemical Engineering. 2019 Jan 1;36(1):136-45.
• [148] V. M. Khaneshan and M. H. Shojaeefard. “Effect of surface temperature on the impaction and deposition of micron sized engine oil particles on a heated flat plate,” Journal of the Brazilian Society of Mechanical Sciences and Engineering (BMSE). Apr 3, 2019
• [149] MH Shojaeefard, A Khalkhali, S Shahbaz “ Analysis and optimization of the surface waviness in the single-point incremental sheet metal forming”
• [150] MR Solouk, MH Shojaeefard, M Dahmardeh “Parametric topology optimization of a MEMS gyroscope for automotive applications”
• [151] M Kolahdoozi, A Amirkhani, MH Shojaeefard, A Abraham “ A novel quantum inspired algorithm for sparse fuzzy cognitive maps learning”
• [152] MH Shojaeefard, SE Hosseini, J Zare “ CFD simulation and Pareto-based multi-objective shape optimization of the centrifugal pump inducer applying GMDH neural network, modified NSGA-II, and TOPSIS”
• [153] MH Shojaeefard, K Tafazzoli Aghvami “Mathematical modeling of thermal contact resistance for different curvature contacting geometries using a robust approach”
• [154] MH Shojaeefard, GR Molaeimanesh, MR Moqaddari “Effects of compression on the removal of water droplet from GDLs of PEM fuel cells”
• [155] MH Shojaeefard, A Sajedin, A Khalkhali “Analysis of the blade thickness distribution effects on the turbocharger turbine performance at full and partial admission condition”
• [156] A Amirkhani, M Shirzadeh, MH Shojaeefard, A Abraham “Controlling wheeled mobile robot considering the effects of uncertainty with neuro-fuzzy cognitive map”
• [157] MR Moqaddari, MH Shojaeefard, GR Molaeimanesh “Impact of carbon paper anisotropy on water droplet movement through the electrodes of proton-exchange membrane fuel cells” Energy & Fuels 2020
• [158] A Amiri, M Shojaeefard, A Qasemian, S Samiezaeh “Investigation of Wall Temperature Effect on Flame Quenching Distance during the Warm-up Period of an SI Internal Combustion Engine” Modares Mechanical Engineering 20 (6), 1647-1660 2020
• [159] YS Ranjbaran, SJ Haghparast, MH Shojaeefard, GR Molaeimanesh “Numerical evaluation of a thermal management system consisting PCM and porous metal foam for Li-ion batteries” Journal of Thermal Analysis and calorimetry 141, 1717-1739
• [160] MH Shojaeefrd, A Khalkhali, S Shahbaz “Sensitivity analysis and optimization of the surface roughness in the incremental forming of mild steel sheets”Scientia Iranica 28 (1), 316-325 2021
• [161] SM Hosseini, MH Shojaeefard, HS Googarchin “Fatigue life prediction of magneto-rheological elastomers in magnetic field”Materials Research Express 8 (2), 025304 2021
• [162] MH Shojaeefard, M Jourabian, AA Rabienataj Darzi “Interactions between hybrid nanosized particles and convection melting inside an enclosure with partially active walls: 2D lattice Boltzmann‐based numerical investigation”Heat Transfer 50 (5), 4908-4936 2021
• [163] A Naderi, A Qasemian, MH Shojaeefard, S Samiezadeh, M Younesi,...“A smart load-speed sensitive cooling map to have a high-performance thermal management system in an internal combustion engine”Energy 229, 120667 2021
• [164] M Mollajafari, MH Shojaeefard“TC3PoP: a time-cost compromised workflow scheduling heuristic customized for cloud environments”Cluster Computing 24 (3), 2639-2656 2021
• [165] MH Shojaeefard, M Jourabian, AAR Darzi “Rectangular heat sink filled with PCM/hybrid nanoparticles composites and cooled by intruded T-shaped cavity: Numerical investigation of thermal performance”International Communications in Heat and Mass Transfer 127, 105527 2021
• [166] MH Shojaeefard, M Jourabian, AA Rabienataj Darzi, A Bayat “Inward melting inside a horizontal multilobed capsule with conductive wall affected by Ag-MgO/water hybrid and MgO/water nanofluids”Journal of Heat and Mass Transfer Research 8 (2), 205-223 2021
• [167] MH Shojaeefard, A Khalkhali, S Khakshournia “A multiscale homogenization procedure to predict the elasto-viscoplastic behavior of polymer-based nanocomposites” Polymers and Polymer Composites 29 (9_suppl), S768-S779 2021
• [168] K Tafazzoli Aghvami, MH Shojaeefard, M Jourabian“Steady‐state estimation of thermal contact conductance between sliding disk and stationary cylinder with similar/dissimilar materials under the isothermally heated boundary …”Heat Transfer 50 (8), 8012-8034 2021
• [169] A Tizvir, MH Shojaeefard, A Zahedi, GR Molaeimanesh “Performance and emission characteristics of biodiesel fuel from Dunaliella tertiolecta microalgae”Renewable Energy 182, 552-561 2022
• [170] MH Shojaeefard, M Mollajafari, SHR Mousavitabar, MW Khordehbinan, ...“A TSP-based nested clustering approach to solve multi-depot heterogeneous fleet routing problem”Métodos numéricos para cálculo y diseño en ingeniería: Revista internacional … 2022
• [171] Scientific Journal of Electronical & Cyber Defence 10 (2) “Detection of Slippery Road Conditions using the Road CCTV Images based on the Convolutional Neural Networks and Transfer Learning” MA Ghiahban, MH Shojaeifard, A Amirkhani
• [172] MH Shojaeefard, M Mollajafari, M Talebi “Fuzzy Logic Timing Control for Standard Crossroad Lights”Modeling and Simulation in Electrical and Electronics Engineering 1 (4), 37-42 2022
• [173] SM Hosseini, MH Shojaeefard, HS Googarchin“The effect of repetitive magnetic and cyclic loading on the fatigue life prediction of a magnetorheological elastomer”Journal of Elastomers & Plastics 54 (2), 279-299 2022
• [174] H Saeidi Googarchin, MH Shojaeefard, SM Hosseini, I Banagar “A comparative study on energy-based fatigue criteria for lifetime calculation of magnetorheological elastomers under multiaxial loading”International Journal of Damage Mechanics 31 (5), 694-722 2022
• [175] AA Dehghan, MH Shojaeefard “Experimental and numerical optimization of a centrifugal pump volute and its effect on head and hydraulic efficiency at the best efficiency point”Proceedings of the Institution of Mechanical Engineers, Part C: Journal of … 2022
• [176] A Najibi, MH Shojaeefard “Fourier and time-phase-lag heat conduction analysis of the functionally graded porosity media”International Communications in Heat and Mass Transfer 136, 106183 2022
• [177] A Rostampour, MH Shojaeefard, GR Molaeimanesh, A Safaei-Arshi “Effects of wall wetting and in-cylinder fuel distribution in an advanced turbo-charged engine”Journal of Central South University 29 (7), 2165-2178 2022
• [178] A Rostampour, MH Shojaeefard, GR Molaeimanesh “A comprehensive investigation of RANS and LES turbulence models for diesel spray modeling via experimental diesel schlieren imaging”Proceedings of the Institution of Mechanical Engineers, Part C: Journal of … 2022
• [179] MH Shojaeefard, S Saremian “Effects of impeller geometry modification on performance of pump as turbine in the urban water distribution network” Energy 255, 124550 2022
• [180] MH Shojaeefard, M Mazidi, SM Agha Mirsalim, MR Yosri “The Thermal Simulation of an Exhaust Valve and its Seat Using Thermal Contact Conductance Obtained from the Inverse Solution”Engine Research 36 (36), 27-38 2022
• [181] MH Shojaeefard, AH Parivar, M Akbari, M Karbasiforoshha “Using predictive combustion model in combustion modeling of cooled EGR turbocharged engine”Engine Research 25 (25), 57-67 2022
• [182] MH Shojaeefard, R Talebi, M Amirpour Molla “A Study on Noise Transmission Loss (TL) Through Duct of Air Intake System of Engine with Porous Insulator Considering Statistical Energy Analysis Method”Engine Research 19 (19), 29-37 2022
• [183] K Moridpour, MH Shojaeefard, M Masih-Tehrani, R Yahyaei “Active variable geometry suspension system development for a small off-road vehicle”International Journal of Vehicle Performance 9 (4), 358-375 2023
• [184] A Rostampour, MH Shojaeefard, GR Molaeimanesh “Role of water micro-explosion on fuel droplet size distribution, engine performance, and emissions in a water-diesel emulsified engine: A comprehensive numerical investigation”International Journal of Engine Research 24 (3), 1110-1120 2023
• [185] MH Shojaeefard, M Mollajafari, NE Pishe, SM Mousavi “Plug-in fuel cell vehicle performance and battery sizing optimization based on reduced fuel cell energy consumption and waste heat”Sustainable Energy Technologies and Assessments 56, 103099 2023
• [186] MH Shojaeefard, NB Sakran, MM Sharfabadi, OA Hussein, ...“Experimental and numerical investigation of the effect of water cooling on the temperature distribution of photovoltaic modules using copper pipes”Energies 16 (10), 4102 2023
• [187] A Rostampour, MH Shojaeefard, GR Molaeimanesh “Investigation of Flame Propagation and Pollutants Formation Within a Combustion Chamber of an RCCI Engine”Iranian Journal of Science and Technology, Transactions of Mechanical … 2023
• [189] M Gheibi, MH Shojaeefard, HS Googarchin, A Zaeri“A generalized-Park-Paulinho-Roesler cohesive zone model to simulate moderate ductile adhesive joints”International Journal of Adhesion and Adhesives 126, 103489 2023
• [190] MH Shojaeefard, M Mollajafari, S Ebrahimi-Nejad, S Tayebi“Weather-aware fuzzy adaptive cruise control: Dynamic reference signal design”Computers and Electrical Engineering 110, 108903 2023
• [191] YS Ranjbaran, MH Shojaeefard, GR Molaeimanesh“Thermal performance enhancement of a passive battery thermal management system based on phase change material using cold air passageways for lithium batteries” Journal of Energy Storage 68, 107744 2023
• [192] MH Shojaeefard, NB Sakran, M Mazidi Sharfabadi “Long-term Evaluation and Analysis of a Residential Building Integrated with PVT/water and PVT Al2O3/Water Systems in Basra, South of Iraq” Journal of Solar Energy Research 8 (4), 1691-1700 2023
• [193] MH Shojaeefard, S Saremian “Studying the impact of impeller geometrical parameters on the high-efficiency working range of pump as turbine (PAT) installed in the water distribution network”Renewable Energy 216, 119060 2023
• [194] HA Haidy Al-Hamzawi, MH Shojaeefard, MM Sharfabadi “Improving the photovoltaic/thermal (PV/T) system by adding the PCM and finned tube heat exchanger”AIP Advances 13 (11) 2023
• [195] MH Shojaeefard, HAH Al-Hamzawi, MM Sharfabadi “Evaluating the Performance of Photovoltaic Thermal Systems in Varied Climate Conditions: An Exergy and Energy Analysis Approach.”International Journal of Heat & Technology 41 (6) 2023
• [196] MH Shojaeefard, M Raeesi “Dynamic analysis and performance improvement of a GDI engine and fuel cell under real driving conditions using machine learning technique”International Journal of Hydrogen Energy 52, 1115-1126 2024
• [197] MH Shojaeefard, S Saremian “Analyzing the impact of blade geometrical parameters on energy recovery and efficiency of centrifugal pump as turbine installed in the pressure-reducing station”Energy 289, 130004 2024
• [198] M Bashiri, MH Shojaeefard, A Qasemian “Molecular dynamics simulations and experimental investigation of viscosity of CuO-oil nanolubricant at different temperatures and volume fractions of nanoparticles”Journal of Molecular Graphics and Modelling, 108750 2024
• [199] A Najibi, MH Shojaeefard“Stress wave propagation analysis of 2D-FGM axisymmetric finite hollow thick cylinder ”Mechanics Based Design of Structures and Machines 52 (4), 1975-1997 2024
• [200] AA Dehghan, MH Shojaeefard, M Roshanaei “Exploring a new criterion to determine the onset of cavitation in centrifugal pumps from energy-saving standpoint; experimental and numerical investigation”Energy 293, 130681 2024

• [149] شجاعی فرد محمدحسن، نصیری طوسی علی، سالاری مجید، "شبیه سازی سه بعدی جریان در واکنشگر شیمیایی کمیرا" international journal of automotive engineering، شماره ۱۲، ۱۳۸۲.
• [150] شجاعی فرد محمدحسن، نصیری طوسی علی، فتاحی احمد، "بررسی اثر پارامترهای تزریق سوخت روی آلاینده های خروجی از یک موتور دیزلی" international journal of automotive engineering، شماره ۱۲، ۱۳۸۲.
• [151] شجاعی فرد محمدحسن، نصیری طوسی علی، مومنی موحد علی، "بررسی اثر swirl بر روی احتراق و آلاینده ها در موتور OM۳۵۵" international journal of automotive engineering، شماره ۱۲، صفحه۱، ۱۳۸۲.
• [152] شجاعی فرد محمدحسن، "تحلیل گذاری حرارتی سوپاپ دود با استفاده از المان محدود" مجله بین المللی علوم مهندسی - دانشگاه علم و صنعت ایران، ۱۳۸۳.
• [153] شجاعی فرد محمدحسن، "شناخت اولویتهاواستانداردهای حمل ونقل هوشمندجاده ای" استاندارد وپژوهش، ۱۳۸۵.
• [154] شجاعی فرد محمدحسن، "بهینه سازی تجربی و عددی ایرودینامیکی دماغه خودروی سمند" مجله مهندسی مکانیک، ۱۳۸۸.
• [155] شجاعی فرد محمدحسن، "بررسی اثرات پدیده بافتینگ بر سطح صدای داخل کابین خودرو و روشهای کنترل آن" انجمن مهندسان مکانیک ایران، ۱۳۸۹.
• [156] شجاعی فرد محمدحسن، "بررسی افت انتقال صوت سیستم مکش هوای موتور با استفاده از مواد متخلخل عایق صوت به روش تحلیل انرژی آماری" تحقیقات موتور، شماره ۱۸، ۱۳۸۹.
• [157] شجاعی فرد محمدحسن، طالبی توتی روح الله، "بررسی منابع نویز ایرودینامیکی درون کابین خودروو روشهای کنترل ان" ISME، ۱۳۸۹.
• [158] شجاعی فرد محمدحسن، "Application of inverse method to the problem of thermal contactance estimtion using simulated measured temperatures " heat and technology، سال ۲۹، شماره ۱، صفحه۱۳۵_۱۴۱، ۱۳۹۰.
• [159] شجاعی فرد محمدحسن، طالبی توتی روح الله، "مدل آلمان مرزی و تحلیلی برای انتقال صوت از پوسته مافلر خودرو" مهندسی مکانیک مدرس، سال ۱۱، شماره ۲، صفحه۱_۱۱، ۱۳۹۰.
• [160] شجاعی فرد محمدحسن، "بررسی عددی و تجربی اثر هندسه چرخ متحرک بر عملکرد پمپ گریز از مرکز هنگام پمپاژ روغن" ماهنامه علمی و پژوهشی مهندسی مکانیک مدرس، ۱۳۹۱.
• [161] شجاعی فرد محمدحسن، "بهینه سازی چندهدفی عملکرد گرمایی لوله حرارتی هنگام استفاده از نانوسیال اکسید الومینیوم" ماهنامه علمی و پژوهشی مهندسی مکانیک مدرس، ۱۳۹۱.
• [162] شجاعی فرد محمدحسن، خلخالی ابوالفضل، "بهینه سازی چند هدفی پروانه پمپ روغن گریز از مرکز" تربیت مدرس، ۱۳۹۱.
• [163] شجاعی فرد محمدحسن، طالبی توتی روح الله، یارمحمدی سطری صادق، "طراحی سطح مقطع تانکر های حمل سیال جهت کاهش تلاطم تانکر با استفاده از تابع بی اسپلاین بر مبنای روش اعمال ضریب جریمه" مکانیک سازه ها و شاره ها، سال ۲، شماره ۲، صفحه۴۵_۵۴، ۱۳۹۱.
• [164] گودرزی کوروش، شجاعی فرد محمدحسن، طالبی توتی روح الله، شهباز شهاب الدین، "بررسی تاثیر صفحه های جدا کننده بین کانتینر و کابین در آیرودینامیک ون-کامیون و مصرف سوخت آن" نشریه پژوهشی مهندسی مکانیک ایران، سال ۱۴، شماره ۱، صفحه۴۵_۵۹، ۱۳۹۱.
• [165] شجاعی فرد محمدحسن، "بررسی و مقایسه اثر نانوسیلات مختلف بر عملکر گرمایی لوله حرارتی" مجله علمی پژوهشی مکانیک سازه ها و شاره ها، ۱۳۹۲.
• [166] شجاعی فرد محمدحسن، طالبی توتی روح الله، یارمحمدی سطری صادق، "بهینه سازی آستانه واژگونش تانکر خودروهای حامل سوخت بر مبنای طراحی الکگوریتم بهینه سازی سطح مقطع تانکر" مهندسی مکانیک مدرس، سال ۱، شماره ۱۳، صفحه۱_۱۲، ۱۳۹۲.
• [167] شجاعی فرد محمدحسن، خلخالی ابوالفضل، زارع جواد، طحانی مجتبی، "بهینه سازی چند هدفی عملکرد گرمایی لوله حرارتی هنگام استفاده از نانوسیال اکسید آلومینیوم" مهندسی مکانیک مدرس، سال ۱۴، شماره ۱، صفحه۱۵۸_۱۶۷، ۱۳۹۳.
• [168] شجاعی فرد محمدحسن، طالبی توتی روح الله، احمدی رضا، غیبی محمد رضا، "تحلیل آکوستیکی پوسته استوانه ای جدار ضخیم با تغییر شکل های برشی مراتب بالا به روش اصل همیلتون" مهندسی مکانیک مدرس، سال ۱۴، شماره ۴، صفحه۱۴۷_۱۵۷، ۱۳۹۳.
• [169] شجاعی فرد محمدحسن، طالبی توتی روح الله، ترابی منصور، احمدی رضا، "بهینه سازی تراکنش توان صوتی پنل های چند جداره با استفاده از الگوریتم ژنتیک" مهندسی مکانیک مدرس، سال ۱۴، شماره ۱، صفحه۲۷_۳۴، ۱۳۹۳.
• [170] شجاعی فرد محمدحسن، طالبی توتی روح الله، رنجبر بهزاد، احمدی رضا، "تحلیل انتقال توان صوتی از طریق پنل های دوجداره کامپوزیت لایه ای با لایه متخلخل میانی تحت شرایط مرزی مختلف" مهندسی مکانیک مدرس، سال ۱۴، شماره ۶، صفحه۱۱_۲۱، ۱۳۹۳.
• [171] شجاعی فرد محمدحسن، طالبی توتی روح الله، یارمحمدی سطری صادق، "بهینه سازی مدل پاندول ترامل جهت شبیه سازی تلاطم سیال در مخزن خودرو های حامل سوخت" نشریه پژوهشی مهندسی مکانیک ایران، سال ۱۶، شماره ۱، صفحه۷_۲۲، ۱۳۹۳.
• [172] شجاعی فرد محمدحسن، "شبیه سازی و بهبود استحکام و عمر خستگی اتصال چسبی تک لبه ای با بکارگیری مدل ناحیه چسبناک تضعیف شونده چرخشی" مهندسی مکانیک مدرس، سال ۹۹، شماره ۹، صفحه۱_۱۱، ۱۳۹۴.
• [173] شجاعی فرد محمدحسن، خلخالی ابوالفضل، کلانتری روزبه، "طراحی پانل جانبی بدنه منفصل خودرو کلاس B و شبیه سازی اجزای محدود برخورد از جانب" مکانیک سازه ها و شاره ها، سال ۵، شماره ۳، صفحه۵۱_۶۴، ۱۳۹۴.
• [174] شجاعی فرد محمدحسن، میرزائی عمار، عابدی نژاد محمدصادق، یاسی یوسف، "بررسی کارائی مدل های مختلف در شبیه سازی عددی عملکرد یک میکرو توربین آبی اگنیو" مهندسی مکانیک مدرس، سال ۱۵، شماره ۶، صفحه۲۲۱_۲۳۰، ۱۳۹۴.
• [175] طالبی توتی روح الله، جریانی گلناز، شجاعی فرد محمدحسن، "محاسبه شتاب آستانه واژگونش خودروی تانکردار تحت تلاطم سیال با استفاده از روش نگاشت" مکانیک سازه ها و شاره ها، سال ۵، شماره ۴، صفحه۱۶۳_۱۷۶، ۱۳۹۴.
• [176] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، حسین اوغلی سجاد، "تحلیل مفهومی استحکام شاتون به کمک روش جرم های متمرکز" مجله مهندسی مکانیک دانشگاه تبریز، سال ۴۶، شماره ۴، صفحه۱۵۱_۱۶۰، ۱۳۹۵.
• [177] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، غیبی محمدرضا، "معرفی روش های عددی بکار رفته جهت مدل سازی عددی اتصالات چسبی" مهندسی مکانیک، سال ۲۵، شماره ۱۱۰، صفحه۴۴_۵۲، ۱۳۹۵.
• [178] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، غیبی محمدرضا، نیک خواه محمدامین، "شبیه سازی و بهبود استحکام و عمر خستگی اتصال چسبی تک لبه ای با بکارگیری مدل ناحیه چسبناک تضعیف شونده چرخه ای" مهندسی مکانیک مدرس، سال ۱۶، شماره ۵، صفحه۲۸۱_۲۸۹، ۱۳۹۵.
• [179] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، بناگر عیسی، طبائی امین، "معرفی و کاربرد مواد هوشمند مغناطیسی در خودرو" مهندسی مکانیک، سال ۱۱۵، شماره ۲۶، صفحه۳۰_۳۷، ۱۳۹۶.
• [180] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، غیبی محمدرضا، "اتصال ترکیبی چسب جوش، روشی کارآمد در کاهش وزن خودروها" مهندسی مکانیک، سال ۲۶، شماره ۱۱۳، صفحه۵۹_۶۶، ۱۳۹۶.
• [181] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، غیبی محمدرضا، ارجمندی محمد، "بررسی تجربی و عددی استحکام اتصال چسبی با مدل ناحیه چسبناک پی. پی. آر. اصلاحشده" مجله مهندسی مکانیک دانشگاه تبریز، سال ۴۷، شماره ۱، صفحه۱۳۱_۱۳۹، ۱۳۹۶.

• 1.Shojaefard. M. H., “Research Norms in the Country”, Research and Development Conference, Iran, 1989.
• 2. Shojaefard. M. H., “Administrative and financial difficulties of Research”, Research and Development Conference, Iran, 1989.
• 3. Shojaefard. M. H., “Automobile Industry in Iran, past, present, and future”, National Automobile Conference, Iran, 1990.
• 4.Shojaefard. M. H., “Wet steam and its effect on Turbines”, Physics Conference of Iran, Iran, 1991.
• 5.Shojaefard. M. H., “Time marching technique for theoretical treatment of wet steam in the cascade blade”, Applied Mathematics Conference, Iran, 1991.
• 6.Shojaefard. M. H., “Sedan Automobile and National Production”, Defending the National Production, Iran, 1991.
• 7.Shojaefard. M. H., “An experimental facility for studies nucleatine blading”, International European Conference on Turbo Machine, UK, 1991.
• 8.Shojaefard. M. H., “Study of steam Turbines efficiency”, Mechanical Engineering Congress, Iran, 1992.
• 9.Shojaefard. M. H., “Effect of overall pressure ratio”, International Conference of Fluid Mechanics ASME, USA, 1993.
• 10. Shojaefard. M. H., “On the drag and shedding frequency of Wire- wrapped cylinders” ASME Conference, Belgium, 1997
• 11. Shojaefard. M. H., “ Islamization of Universities ”, University Board of Trustee Seminar, Iran, 1997.
• 12. Shojaefard. M. H. , Ehghaghi, M. B., “ Measuring the large hydraulic Pumps specifications” , International Mechanical Engineering Conference”, Iran, 1998.
• 13. Shojaefard. M. H. , Ehghaghi, M. B., “ Diametrical effect of water drops on current of two phase steam Turbines” , 1998
• 14. Shojaefard. M. H., Yassi, Y., “An experimental study on low micro hydro Turbine”, International Conference of Mechanics, Iran, 1998.
• 15. Shojaefard. M. H. , Noorpoor, A. R., “ Numerical experimental simulation of three dimensional viscose current on the centrifugal pump propeller” , Flow Dynamics Conference, Iran, 1999
• 16. Shojaefard. M. H., Ahmadi, F., “The effect of propeller geometry on viscose fluid in centrifugal pumps”, Flow Dynamics Conference, Iran, 1999
• 17. Shojaefard. M. H., Ehghaghi, M., “Study of wet steam drops on tubes with constant expansion rate”, Flow Dynamics Conference, Iran, 1999.
• 18. Shojaefard. M. H., Noorpoor, A. R., “Numerical and experimental simulation of currents about circumference of a dolphin shape solid”, Second Annual International Conference of Applied mathematics, Iran, 1999.
• 19 . Shojaefard. M. H. , Noorpoor, A. R. and Ahmadi, F., “ Numerical solution for Non- Developed Temperature field in a pipe” , International conference of Mechanical Engineering Society, 2001
• 20. Shojaefard. M. H., “Numerical solution for double dimension inside the rocket tube”, International conference of Mechanical Engineering Society, ,Iran Tehran 2001
• 21.Shojaefard. M. H., Noorpoor, A. R. and Nasr, A., “Numerical solution of aerodynamic of hybrid vehicles” , Hybrid Vehicles Congress, Iran, 2001.
• 22.Hosseini Tehrani, P., Shojaeefard, M. H. and Khorshidi, K., “Laser Surface Hardening process, Considering Finite Element Method”, Conference of Iranian Manufacturing Engineering, Iran, 2002.
• 23.Hosseini Tehrani, P., Shojaeefard, M. H. and Khorshidi, K., “Laser Surface Hardening Considering Coupled Thermoelasticity”, International conference of Iranian Mechanical Engineering Society, Iran, 2002.
• 24. Shojaefard. M. H. , Noorpoor, A. R. “ Numerical simulation of fluid flow behavior” , ASME Conference, ICE 2003, Austria.
• 25. Shojaefard. M. H., Kamali, R. and Noorpoor, A. R., “Numerical solution exhaust flow around exhaust valve”, ASME Conference, ICE 2003, Austria.
• 26. Shojaefard. M. H., Noorpoor, A. R.,Gharazi,S. “Consideration of gas flow in exhaust system”, SAE Conference, Powertrain & Fluid Systems Conference &Exhibition, Oct 2003.
• 27.Shojaefard. M. H., Noorpoor, A. R., Shariati,M, “3-D Numerical consideration for gasoline injector”, SAE Powertrain & Fluid Systems Conference & Exhibition, Oct 2003.
• 28. Shojaefard. M. H., Noorpoor, A. R. and Avanesians A., “ Simulation of the turbulent flow around a subsonic airfoil using RNG K- model” , International Conference of Iranian Aerospace Society, Iran, 2004.
• 29. Shojaefard. M. H., Noorpoor, A. R. and Maghsoodi, N., “A review on direct linear numerical simulation method”, International Conference of Iranian Aerospace Society, Iran, 2003
• 30.Shojaefard. M. H., Noorpoor, A. R. and Keshtiarast, V., “ Numerical simulation of transonic nozzle flow ”, International Conference of Iranian Aerospace Society, Iran, 2004.
• 31. Shojaefard. M. H., Noorpoor, A. R. and Goudarzi, K., “ Study of CNG Fuel in Vehicles and Comparision with Deisel Engines ”, 1th National Conference of CNG Vehicles, Iran, 2004.(Persian)
• 32. Shojaefard. M. H. and Goudarzi, K., “ EURO Standards for Vehicles and its Evaluating for Internal Vehicles ”, 1th National Conference of Cosumption Energy Optimization, Iran, 2004.(Persian)
• 33. Shojaeefard, M. H., and Noorpoor, A. R., ‘‘Numerical Simulation of Heat and Fluid Flow Behavier in a Pipe Flow with Sinusoidal Boundary Condition'', ASME Internal Combustion Engineering Conference, Austria, 2003.
• 34. Shojaeefard, M. H., Noorpoor, A. R. and Moghaddam, R. K., ''Numerical Analysis on Exhaust Flow around Exhaust Valve'', ASME Internal Combustion Engineering Conference, Austria, 2003.
• 35. Shojaeefard, M. H., Noorpoor, A. R. and Bozchaloe, D. A., ''Thermo-mechanical Stress Analysis of Exhaust Valve in X7 Car'', International Mechanical Engineering Conference, Kuwait, 2004.
• 36. Shojaeefard, M. H., Noorpoor, A. R. and Salek, M., ''Numerical Solution Flow Field in Porous Section of Catalytic Converter in a Diesel Engine'', International Mechanical Engineering Conference, Kuwait, 2004.
• 37. Shojaeefard, M. H., Noorpoor, A. R. and Boyaghci, F. A., ''Numerical Simulation of Gas Flow in Exhaust Line of an Automotive Using Finite Element Method'', International Mechanical Engineering Conference, Kuwait, 2004.
• 38. Shojaefard. M. H. , Noorpoor, A. R., Mohammadi, F., Ghaffarpour. M., ''Thermal Contact Analysis in Exhaust Valve of Internal Combustion Engine'', ASME Internal Combustion Engineering Conference, Canada, 2005. 115, pp 128-134.
• 39.Shojaefard. M. H ., Noorpoor, A. R., Yarjiabadi and H., Habibian, M., ''Particle Size Effects on Hydro-Cyclon Performance'', International Conference on Recent Advances in Mechanical and Material Engineering (ICRAMME2005), Malaysia, 2005.
• 40.Shojaefard. M. H., Noorpoor, A. R., Alizadehnia, S. and Ghaffarpour, M., ''Numerical Analysis of an ICE Head'', International Conference on Recent Advances in Mechanical and Material Engineering (ICRAMME2005), Malaysia, 2005.
• 41.Shojaefard. M. H., Noorpoor, A. R., Zabetian, M. and Ghaffarpour, M., ''Analysis of Engine Operating Conditions on Thermal Behavior of Piston'', International Conference on Recent Advances in Mechanical and Material Engineering (ICRAMME2005), Malaysia, 2005.
• 42. Shojaefard. M. H., Noorpoor, A. R., Mohammadi, F. and Ghaffarpour, M., ''Thermal Contact Analysis Using System Identification Method'', International Conference on Recent Advances in Mechanical and Material Engineering (ICRAMME2005), Malaysia, 2005.
• 43.Shojaefard. M. H., Ehghaghi, M. B. and Boyaghchi, F. A., ''Experimental and Numerical Investigation of Centrifugal Pump Performance when Handing Highly Viscous Fluids'', International Conference on Recent Advances in Mechanical and Material Engineering (ICRAMME2005), Malaysia, 2005.
• 44.Shojaefard. M. H., Ehghaghi, M. B. and Boyaghchi, F. A., ''Experimental and Numerical Investigation of Highly Viscous Fluids Effects on Centrifugal Pump Performance'', 1th International Conference on Experiments/Process/System Modelling/Simulation/Optimization (1th IC-EpsMsO 2005), Athens, 2005.
• 45. Shojaefard. M. H., Ehghaghi, M. B. and Boyaghchi, F. A., ''Numerical Study of a Centrifugal Pump Performance when Handling Viscous Fluids'', 4th International Conference on Computational Heat and Mass Transfer (4th ICCHMT 2005), France, 2005.
• 46.Shojaefard. M. H., Ehghaghi, M. B. and Boyaghchi, F. A., ''Experimental and Numerical Investigation of Centrifugal Pump Performance when Handing Highly Viscous Fluids'', International Mechanical Engineering Congress and Exposition, Florida USA, 2005.
• 47. Shojaefard. M. H., Goudarzi, K. and Keshavarzi A., “ Investigation of the Vehicle Cover on Drag Coefficient in Pakab Nissan ”, National Conference of Mechanical Engineering, Azad University, Iran, 2006.(Persian)
• 48. Shojaefard. M. H. , Goudarzi, K. and Madani N., “ Numerical Investigation of Flow in Jet Pump ”, National Conference of Mechanical Engineering, Azad University, Iran, 2006.(Persian)
• 49. Shojaefard. M. H. , Goudarzi, K. and Aminaei H., “ Numerical Investigation of Flow Pattern and Shock Wave behavior over Supercritical and Conventional Airfoils” , 12th International Conference on Aerospace Sciences & Aviation Technology, May 29-31, 2007, Cairo, Egypt .
• 50. Shojaeefard M. H. , Goudarzi K. and Ariafar K., "Numerical Investigation of Dump-Gap’s effect on Velocity Distribution and Flow Split in a Model Reverse-Flow Gas Turbine Combustor", 21st Canadian Congress of Applied Mechanics , June 3-7, 2007 , Toronto , Ontario Canada .
• 51. Shojaeefard M. H. , Noorpoor A.R., Goudarzi K. and Fazelpour M., "Estimating Interface Conductance between Periodically Contacting Surfaces Using the System Identification Technique", 11th European Automotive Congress, May 30- June 1, 2007, Budapest, Hungary .
• 52.Shojaeefard M. H., Goudarzi K. and Ariafar K., "Numerical Investigation of Inlet Velocity’s effect on Flow Characteristics Model Reverse-Flow Gas Turbine Combustor", International Conference on Engineering and Mathematics, Bilbao Spania, 2007 .
• 53. Shojaeefard M. H. , Goudarzi K. and Askari S., "Numerical Investigation of effects of the Fan on the Aerodynamic Forces of an Airfoil Containing a Fan", International Conference on Engineering and Mathematics, Bilbao Spania, 2007 .
• 54- Shojaeefard M. H., Goudarzi, Khoshneyat, " Investigation the Dffect of Ring and Tire on Wheel Aerodynamic Forces" ISME 2008-1284
• 55- Shojaeefard M. H. , Hosseinimanesh, Baharmi"Three Cimensional analysis of louvered fins in compact heat exchangers using CFD " ISME2008-1362
• 56- Shojaeefard M. H., Goudarzi, Naghib, "Numerical analysis of Effects of Gurney Flaps on ghe life Coefficient of a NACA0015 Airfoil" ISME2008- 1805.
• 57- Shojaeefard M. H., Akhlaghi, Hosseinimanesh, " Numerical Investigation of the effects of the inlet Mixture velocity on the solid – liquid separation performance separator (Isep)" ISME 2008- 1915.
• 58- Shojaeefard M. H. , Akhlaghi, Hosseinimanesh, " CFD study and Experimental Comparison of the Solid- Liquid Flow Separation in a Dual lnvolutes Axial – Flow Cyclonic Separator ( Isep)
• 59-Shojaeefard M. H., Noorpoor,Sadeghkazemi,"The Effects of Inlet Valve Lift Profile Variation on Volumetric Efficiency and In- Cylinder Turbulence Characteri" ISME2008-2850
• 60- Shojaeefard M. H., Goudarzi, " Estimation of Thrmal Contact Conductance using Conjugate Gradient Method " ISME2008-1247( Accepted subject to full paper)
• 61- Shojaeefard M. H., Goudarzi, Naghib, " Numerical analysis of effects of Gurney Flaps on the lift, drag, and pitching – moment coefficients of a NACA00" ISME2008- 1332(Accepted subject to full paper)
• 62- Shojaeefard M. H., Yargiabadi, sahragard , " Consideration of the Mass Flow Rate Effects on Hydroylone performance " ISME2008- 2599(Accepted subject to full paper)
• 63 . Shojaeefard M. H. , Goudarzi K., "Estimating Interface Conductance between Periodically Contacting Surfaces Using the System Identification Technique", 2th Jordanian International Conference of Materials Science and Engineering, 4-6 September 2007, Al-Balqa' Applied University Al-Salt, Jordan.
• 64- Shojaeefard M. H., Goudarzi K. "Finite Element analysis of thermal contact between two contacting bars", Conference on Applications and Design in Mechanical Engineering, 25 – 26 October 2007, Perlis, Malaysia.
• 65- Shojaeefard M. H., Goudarzi K. and Sh. Karbalaeian "Neural Network Solution for Thermal Contact in Exhaust Valve ", Conference on Applications and Design in Mechanical Engineering, 25 – 26 October 2007, Perlis, Malaysia.
• 66- Shojaeefard M. H., Goudarzi K., D. Kashi and S. Askari, "Flow simulation around a missile with and without canard", Conference on Applications and Design in Mechanical Engineering, 25 – 26 October 2007, Perlis, Malaysia.
• 67- Shojaeefard M. H. , Goudarzi K. and H. Fotouhi, " Numerical Study of Airflow Around Vehicle A-Pillar ", Conference on Applications and Design in Mechanical Engineering, 25 – 26 October 2007, Perlis, Malaysia.
• 68- Shojaeefard M. H. , Goudarzi K. and S. Askari, " Analytical Solution of Flow over an Airfoil Contacting a Fan and Calculation of Lift and Drag Forces of the Airfoil ", MDP-9 Conference Mechanical Design and Production Department Faculty of Engineering, Cairo University, January 8-10, 2008 , Egypt .
• 69- Shojaeefard M. H. , Goudarzi K. and H. Fotouhi, " Simulation of Airflow around Vehicle A-pillar and related Noise ", MDP-9 Conference Mechanical Design and Production Department Faculty of Engineering, Cairo University, January 8-10, 2008 , Egypt .
• 70- Shojaeefard M. H. , Goudarzi K. and M. Sh. Mazidi "Inverse Heat Conduction of Contacting Surfaces", 7th Conference of Iranian Aerospace Society, 19-21 February 2008, Sharif University of Technology, Tehran, Iran.
• 71- Shojaeefard M. H., Goudarzi K. and S. Askari " Analytical Solution of Flow over an Airfoil Contacting a Fan and Modification of Analytical Solution using Experimental Data",7th Conference of Iranian Aerospace Society, 19-21 February 2008, Sharif University of Technology, Tehran, Iran.
• 72- Shojaeefard M. H., Goudarzi K. and S. Askari " Numerical Solution of Flow over an Airfoil Contacting a Fan and comparison with Experimental Results ", 7th Conference of Iranian Aerospace Society, 19-21 February 2008, Sharif University of Technology, Tehran, Iran.
• 73- Shojaeefard M. H. , Goudarzi K., " Estimation of Thermal Contact Conductance using Conjugate Gradient Method " , 16th. International Conference on Mechanical Engineering , May 14-16, 2008, Shahid Bahonar University of Kerman, Iran .
• 74- Shojaeefard M. H. , Goudarzi K., and R. Khoshneyat," The Effects of Ring and Tire upon Wheels Aerodynamics " , 16th. International Conference on Mechanical Engineering , May 14-16, 2008, Shahid Bahonar University of Kerman, Iran .
• 75- Shojaeefard M. H. , Noorpour A.R., and Kazemi M. S.," The Effects of Inlet Valve Lift Profile on Volumetric Efficiency and In-Cylinder Turbulence Characteristics in a Heavy Duty Diesel Engine." , 16th. International Conference on Mechanical Engineering , May 14-16, 2008, Shahid Bahonar University of Kerman, Iran .
• 76- Naghib, I. , Shojaeefard M. H. , Ahmadi P., and Nosrati, M.," Numerical Analysis of Effects of Gurney Flaps on the Lift Coefficient of a NACA0015 Airfoil" , 16th. International Conference on Mechanical Engineering , May 14-16, 2008, Shahid Bahonar University of Kerman, Iran .
• 77- Naghib, I. , Shojaeefard M. H. , Ahmadi P., and Nosrati, M.," Numerical Analysis of Effects of Gurney Flaps on the Lift, Drag and Pitching-Moment Coefficient of a NACA0012 Airfoil" , 16th. International Conference on Mechanical Engineering , May 14-16, 2008, Shahid Bahonar University of Kerman, Iran .
• 78- Shojaeefard M. H. , Hoseinimanesh H., and Bahrami S.," 3D Analysis of the Effect of the Fins in Compact Heat Exchangers using CFD" , 16th. International Conference on Mechanical Engineering , May 14-16, 2008, Shahid Bahonar University of Kerman, Iran .
• 79- Akhlaghi M., Shojaeefard M. H. , and Hoseinimanesh H., " Experimental and Numerical Investigation of the Effect of Multiphase Flow Inlet Velocity upon I-sep" , 16th. International Conference on Mechanical Engineering , May 14-16, 2008, Shahid Bahonar University of Kerman, Iran .
• 80. Shojaeefard M. H. , Goudarzi K. and M. Sh. Mazidi, "Solution of Inverse Heat Conduction of Periodic Contacting Surfaces ", 3rd International Conference “From Scientific Computing to Computational Engineering”, Athens, Greece, 9–12 July, 2008.
• 81. Shojaeefard M. H. , and Goudarzi K., " Thermal Contact Conductance; Simillar and Dissimilar Contacting Surfaces ", 3rd International Conference “From Scientific Computing to Computational Engineering”, Athe ns , Greece , 9–12 July, 2008.
• 82. Shojaeefard M. H. , Goudarzi K., Jamali M. and Ahmadi A. "Numerical Investigation of Aerodynamic Coefficients of a Tow 2B Missle in Compared with Analytical Data using Small Disturbance Theory ", 3rd International Conference “From Scientific Computing to Computational Engineering”, Athens, Greece, 9–12 July, 2008.
• 83. Shojaeefard M. H. , Goudarzi K., J and Naghib I. "Computational Investigation of Effects of Gurney Flaps on a NACA0012 Airfoil ", 3rd International Conference “From Scientific Computing to Computational Engineering”, Athens, Greece, 9–12 July, 2008.
• 84. SHOJAEEFARD M., AHMADI A., "identification of black - box linear models the case of thermal periodic contact of exhaust valves in internal combustion engines", Proceedings of the fourth international conference on thermal engineering theory and applications , 2009.
• 85. SHOJAEEFARD M., TALEBITOOTI R., "Sound Transmission Through Double-Panel Structure Lined with Poroelatic Materials by the use of the Statistical Energy Analysis", Proceedings of 18 Annual International Conference on Mechaical Engineering -ISME , 2010.
• 86. SHOJAEEFARD M., "The Thermal Simulation of a salt- Gradent solar Pond", Proceedings of دومین کنفرانس بین المللی و سیزدهمین کنفرانس سالانه دینامیک شاره ها , 2010.
• 87. TALEBITOOTI R., and SHOJAEEFARD M., "SEA and Analytical model of sound transmission loss through Sandwiches Shells lined with poroelastic materials", Proceedings of The 2th International Conference on Composites Characterization Fabrication and Application (CCFA-2) , 2010.
• 88. SHOJAEEFARD M., "Numerical sloution turbulent flow over back ward facing step-the efects of step height duct angle", Proceedings of regional conference on Mechanical engineering - RCME 2011
• 89. SHOJAEEFARD M., "Modeling of Expansion Device in Transiemnt Performance of Absorption Chillers", Proceedings of Third International conference on Applied Energy , 2011.
• 90. SHOJAEEFARD M., "Investigation of Geometry Total Condition and Waves effect on two phase liquid", Proceedings of Preceedings of ASME Turbo Expo , 2011.
• 91. SHOJAEEFARD M., "Impeller geometry effects on performance of centrifugal pump for handlling viscous fluids", Proceedings of کنفرانس بین المللی مهندسی مکانیک - بیرجند , 2011.
• 92. SHOJAEEFARD M., "Development of the experimental equation for the centrifugal pump efficency reduction when handling viscous fluid", Proceedings of کنفرانس بین المللی مهندسی مکانیک , 2011.
• 93. NAJAFI F., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., "Solution of Falkner Skan equation with heat transfer an analytical approach", Proceedings of 1st International Conference on Mechanical and Aerospace Engineering , 2016.
• 94. SHOJAEEFARD M., KHALKHALI A., and GHADIRINEJAD K., "Improving an automotive bumper structure for pedestrian protection", Proceedings of 18th International Conference on Aerospace Mechanical Automotive and Materials Engineering, PP. 1_6, 2016.